How to do the pretreatment of stainless steel hardware products before electroplating?

How to do the pretreatment of the electroplating of stainless steel hardware products? It is everywhere in our life, everyone knows What is the electroplating processing of hardware products? How can we do the pretreatment? Let's take a look at what Runji hardware products processing manufacturers say!

1. The pretreatment of the electroplating of stainless steel hardware products should be done well. The ability of the atoms to be fully exposed is the key to the good adhesion of the subsequent coating.

2. When electroplating, pay attention to the matching of the plating metal and the base metal.

3. Pay attention to the matching between different coatings when superimposing different coatings in the electroplating processing of stainless steel hardware products. The previous The coating should be cleaned, and if necessary, weak etching should be carried out to eliminate the oxide film of the previous coating.

4. If high temperature baking treatment is required, the stress between the product and the coating, such as zinc or aluminum, should be considered After the alloy is electroplated, it cannot be baked at too high a temperature.

5. When the stainless steel hardware products are electroplated and processed with sealer paint, you should also pay attention to the baking temperature when baking. rationality.