Lets learn the processing process of electronic cigarette accessories together!

Stainless steel electronic cigarette accessories should be familiar to everyone, and can be seen everywhere in our daily life , but to say that the processing process of stainless steel electronic cigarette accessories may not be familiar to everyone, let's take a look at the processing process of electronic cigarette accessories together with electronic cigarette accessories manufacturers.

Processing process of electronic cigarette accessories:

1. First of all, the operator should understand the correct operation method, avoid accidents, and check the clothing after entering the workplace. does it reach the requirement.

2. Before working, check whether the sports machinery is filled with lubricating oil, and then start and check the clutch , Check whether the brake is normal, and run the machine tool for 1-3 minutes. It is strictly forbidden to operate when the machine is faulty.

3. When replacing the mold, you need to turn off the power first, and then start to install the new mold after the machine stops running. After debugging, check whether the mold is symmetrical and reasonable.

4. During mechanical work, it is forbidden to put your hand into the working area of the slider, and it is strictly forbidden to take and place the workpiece by hand. Standard tools are required to pick and place workpieces in the die. If you find that the machine has abnormal sound or the machine fails, you should immediately turn off the power switch for inspection.

5. Wait for irrelevant personnel to leave the mechanical work area and remove the sundries from the workbench. Turn on the power to start the machine.

The above is the specific process of electronic cigarette accessories processing. For everyone's safety, everyone is processing electronic cigarette accessories. Be sure to pay attention.